What Are The Precautions For The Maintenance Of Drip Irrigation Pipe Production Line?

1. Maintenance of mechanical parts

· Gearbox and transmission maintenance: Check the gearbox oil level regularly to keep the oil sufficient and clean. Replace the lubricating oil after 50 hours of operation of the new equipment, and then change it regularly every 3 months.

· Bearing lubrication: Regularly apply high-quality lubricating butter on all kinds of bearings to reduce friction and wear.

· Fastener inspection: Check and tighten screws and fasteners at fixed parts regularly to ensure equipment stability.

2. Maintenance of electrical system

· Motor inspection: Regularly check the operating temperature, vibration and noise of the motor to ensure that it is within the normal range.

· Transmission belt maintenance: check the tension of the transmission belt regularly and adjust or replace it in time.

· Cleaning of electrical components: regularly clean the dust and oil on the surface of electrical components, check whether the wiring is firm, and timely replace the aging components.

3. Maintenance of heating and cooling system

· Preheating operation: After the equipment stops working, it is necessary to heat the barrel. And the machine head to the required temperature can be restarted, strictly prohibited cold machine start.

· Appearance and cooling system cleaning: regularly clean the oil and water on the surface of the equipment to prevent rust; Check the cooling water pipeline and solve the leakage phenomenon in time.

4. Lubrication and transmission system maintenance

· Lubrication of traction device: fill lubricating grease regularly, so that the traction wheel is in a relaxed state when not used for a long time.

· Screw use note: it is not allowed to run for a long time under no-load high speed, so as not to cause wear.

· Drive belt inspection: Check the tension of the main motor drive belt frequently and adjust it at any time.

5. Regular calibration and maintenance

· Equipment calibration: Periodically calibrate equipment parameters, such as temperature, pressure, speed, etc., to ensure equipment accuracy and stability.

· Equipment maintenance: According to the usage and maintenance records, make maintenance plans, regular maintenance and replacement of wearing parts.

Through the above detailed maintenance measures, it can ensure the long-term stable operation of the drip irrigation pipe production line, improve production efficiency and product quality.